Switched Stereo 1/4" Enclosed Jack.
Mounts in an 11mm hole.
Includes two flat plastic washers to allow the jack to be assembled flush (or almost flush) against the inside panel. Using two washers decreases strain on the solder joints of the jack!
Similar, but not the same as the Neutrik NMJ6HCD2. The Love My Switches jack body width is 20mm, vs. 18.2mm for the Neutrik. Check the schematic for measurements.
The Specs:
1/4" stereo jack - switched
Raised PCB pins
Enclosed frame body with two washers and hexagonal nut