Bring some vintage style to your pedal, amp, console, 500 series/API lunchbox or project build with the Neve/Marconi Style Wing Knob. Made of durable plastic in five colors, with a clear plastic skirt.
This take on the classic British wing knob harkens back to the electronics designs of the 60s and 70s, specifically the Neve consoles, Marconi radio electronics, and WEM Pedals (the likes of which John Lennon made famous).
Get it in classic black or bright blue, or opt for a vintage vibe with oxblood, gray, and deep, dark blue. Two set screws hold a 1/4" (6.4mm) smooth shaft potentiometer in place.
You should know these came to us from the supplier with some wear and tear. There's micro-scratches and micro-pitting on some of them. Read: They will not look pristine and factory fresh. (Most folks may not notice this, but my beloved perfectionists will, so I want to set expectations here.)
Plastic knob with clear plastic skirt
White painted indicator
Two set screws: Brass flat head screws for gray, royal blue, and dark blue knobs; 1.5mm hex screws for oxblood and black knobs
For 1/4" (6.4mm) smooth shaft potentiometer
26mm outer diameter at skirt
17mm outer diameter at body of knob
11.5mm from bottom of the knob to the center of the set screws. 13mm to the top of set screws (A slightly longer pot shaft length than typical is necessary for these knobs if your panel/enclosure thickness is thicker than usual. Check yer measurements!)
Need a hex key? Buy the 1.5mm Allen wrench here.