Future-proof your repairs! This SPST foot switch is seriously strong, seriously quiet, and a serious time-saver!
This single pole, single throw normally open momentary foot switch comes pre-wired with a connector and mate. That means it's really easy to swap a switch without having to re-solder. How cool is that? See the product images for the connector diagram.
The 24AWG leads are about 2.95 inches long. If you prefer to solder the wires directly to your PCB, just snip it off.
The SPST momentary foot switch is perfect for tap tempos, feedback loops, relays, and anywhere you want the option for a constant or fast foot tap.
We're calling this the "pro-grade" SPST, and it's a seriously awesome switch that many large manufacturers like Strymon, Earthquaker, JHS, and others rely on. This switch is easy to depress and whisper quiet, making it a great upgrade to an existing pedal or project.
***If you are a boutique pedal-maker, this switch can save you a HUGE amount of time and hassle. When it's time to replace this switch, there's no need to have your customer send in their pedal for repair. Instead, you'll send them this foot switch and a link to the super-easy-to-follow video you've made that shows them how to swap out the switch. No soldering required.
SPST momentary foot switch
Normally open Off-(On)
Two hex nuts, 1 spring washer assembly
Pre-wired with XH-2Y connector and XH-2A mate
Solder temp: 400°F / 200°C for 3 seconds
Rating: 6A 125V AC, 3A 250V AC, 10A 12VDC
12mm mounting hole
Wire length: 2.95" (75mm) from the end of the solder lug to connector