Do you want a perfect powder coat 1590A die-cast aluminum enclosure? Because this is it.
Choose from three powder coat options: Black, White, and Silver.
These top-notch M45 enclosures are a bit larger than the well-known 1590A Hammond replacement enclosure you might be used to: about 7mm longer, 8mm wider, and 4mm taller than standard.
But, the biggest plus for this box is the suspended screw hole tab design, typical for Gorva Design enclosures, but especially meaningful for the tight builds of a 1590A. Pedal builders use the increased internal room to mount 1/4" jacks. (We recommend the compact Lumberg KLBM 3 and KLB 3 jacks.)
Be sure to check the measurements when creating your drill template.
1590A Hammond clone enclosure
Manufactured by Gorva Design (The dude behind the pedal company 6 Degrees FX.)
Black, White, or Silver powder coat
With back plate and four screws
Outer height: 35mm
Internal height: 33mm
DOWNLOAD HI RES TECHNICAL DRAWING
Need more information on 1590A enclosures? Here is the break-down on our entire line:
1590A: Our standard aluminum enclosure that we've been selling for years. Available in Bare Aluminum and Black, White, Blue, and Red powder coat. 92.5 x 38.5 x 31mm
1590A - CNC Pro: Sourced for customers who tell us they prefer slightly thinner aluminum walls (than our standard enclosure) for CNC drilling. Available in Bare Aluminum. 93.6 x 38.5 x 32mm
1590A - Gorva Design M45: Produced for premium builds with upgraded design specs such as silky smooth finish and rounded top edge. Available in Bare Aluminum and Black, White, and Silver powder coat. 100 x 45 x 35mm