Do you want a perfect powder coat? Or, perhaps you are looking for bespoke, boutique, out-of-this-world gorgeousness? Buckle-up, friends: The 125B powder-coat enclosures manufactured by Gorva Design are here. These top-notch enclosures are a tiny bit skinnier than the normal 125B enclosures you might be used to. If you're using an off-the-shelf PCB, check the measurements to make sure it will fit.
Choose from six powder coat options: Black, Military Green, Silver, White, Black Sparkle, and Chameleon!
More About the Matte Finish: The matte enclosures (black, military green, silver, white) have an eggshell satin finish with a smooth, soft touch.
- Perfect Powder Coat: Automated powder coating yields a smooth, even painted surface with no bubbles and no indentations. In the powder-coating process, each enclosure is hooked to a rail and enters the machine (kind of like a train car hooked to a track). There is no over-spray inside the enclosure. This means you won't need to scratch off any paint in the countersunk screw holes to ensure grounding.
- High-Quality Gorgeousness: The smooth, rounded edge along the enclosure just looks good and adds an dose of wow to the finished build. In production, the mold goes through a heated treatment that strengthens the overall structure and allows the aluminum to flow better than it would at room temperature, producing perfect corners and edges.
More About the Black Sparkle and Chameleon Finishes: Four layers of paint produce an absolutely eye-popping effect on these beautiful enclosures. Black Sparkle is black and sparkly, while the Chameleon enclosure layers green, purple, and 3D sparkle into this shiny powder-coat finish. As you change your viewing angle, the colors seem to swap. The sparkle really pops in sunlight and some lighting. Due to the unique nature of this powder-coat, some occasional micro-bubbling may be present. LIMITED EDITION: If you want this super-cool finish-->>> buy it now!
With sinuously curved top edges, a recessed back plate, and a commitment to quality at every level of manufacturing, this 125B Hammond clone is absolutely eye-popping.
If you need a large amount, Contact us for custom colors!
125B Hammond clone enclosure
Manufactured by Gorva Design (The dude behind the pedal company 6 Degrees FX.)
Black, silver, white, or chameleon powder coat
With back plate and four screws
Outer depth: 39mm
Inner depth: 35mm
Need more information on 125B enclosures? Here is the break-down on our entire line:
125B: Our standard aluminum enclosure that we've been selling for years. Available in Bare Aluminum and Black, White, Blue, and Red powder coat. 121 x 66 x 39mm
125B - CNC Pro: Sourced for customers who tell us they prefer slightly thinner aluminum walls (than our standard enclosure) for CNC drilling. Available in Bare Aluminum. 122 x 66.98 x 39.64mm
125B - Gorva Design C65: Produced for premium builds with upgraded design specs such as silky smooth finish and rounded top edge. Available in Bare Aluminum and Black, Silver, White, and Chameleon powder coat. 117.2 x 65 x 39mm